Azodicarbonamide (ADC)
An organic chemical blowing agent available in multiple grades for controlled gas generation during polymer processing.
Typical usesEVA, PVC, PE and rubber foam products, including footwear, profiles, sheets and insulation.
Complete catalogue
Industrial Chemical Products
Browse 6 categories and 44 products. Search by product name, abbreviation or CAS number, then send the product and application details for AOBO's review.
Results update as you type.
No matching products found.
Blowing Agents
10 productsN,N-Dinitroso Pentamethylenetetramine (DNPT/DPT)
An exothermic organic blowing agent that releases gas when heated; decomposition behavior depends on formulation and activators.
Typical usesSponge rubber and selected PVC or polymer foam applications. Processing conditions must be matched to the grade.
Blowing Agent Auxiliary Agent (Urea Ester BK / Surface Treatment Urea)
An auxiliary or activator used with chemical blowing agents to adjust decomposition behavior, dispersion and foam processing.
Typical usesLower-temperature or controlled foaming systems for EVA, PVC, rubber and related polymer compounds.
Confirm chemical identity, grade and suitability before ordering.
Compound Blowing Agent
A formulated blend of blowing agent, activator, dispersant or carrier designed for a defined processing window.
Typical usesEVA footwear, PVC foam, PE foam and rubber products where gas yield, odor, dispersion or cell structure needs to be tuned.
Eco-friendly Blowing Agents
A product class selected to meet specific residue, odor, handling or regulatory targets; composition varies by grade.
Typical usesFoamed footwear, seals, insulation, profiles and other rubber or plastic products after application testing.
OBSH
A sulfonyl hydrazide chemical blowing agent generally supplied as a white powder and used at a lower processing range than standard ADC grades.
Typical usesNatural and synthetic sponge rubber, EPDM, PVC wallpaper, expanded plastics, seals, rollers and insulation.
Benzenesulfinic Acid Zinc Salt (ZBS/BM)
A zinc sulfinate additive used as an activator in chemical foaming formulations to modify effective decomposition behavior.
Typical usesCompound blowing-agent systems for rubber and plastics where processing temperature and gas release need adjustment.
Confirm chemical identity, grade and suitability before ordering.
Zinc P-Toluenesulfinate (ZTS/TM)
A zinc p-toluenesulfinate activator used with primary chemical blowing agents in formulated foaming systems.
Typical usesADC-based rubber and plastic foam compounds requiring improved decomposition efficiency or a tailored activation window.
Confirm chemical identity, grade and suitability before ordering.
P-Toluenesulfonyl Semicarbazide (PTSS)
A sulfonyl semicarbazide chemical blowing agent for higher-temperature polymer processing.
Typical usesSelected PVC, nylon, ABS, polycarbonate and other molded or extruded polymer foam applications.
P-Benzene Sulfonyl Hydrazine (TSH)
A sulfonyl hydrazide-type chemical blowing agent used in lower-temperature rubber foaming systems.
Typical usesExpanded natural and synthetic rubber products processed within the grade-specific decomposition range.
Flame Retardants
5 productsTris (2-chloroisopropyl) Phosphate (TCPP)
A chlorinated phosphate ester used as an additive flame retardant and plasticizing component.
Typical usesFlexible and rigid polyurethane foams, construction materials, coatings, adhesives and selected polymer formulations.
Triethyl Phosphate (TEP)
A phosphate ester used as a flame-retardant additive, plasticizer, process aid and chemical intermediate.
Typical usesPolyurethane, plastics, resins, coatings and other industrial formulations subject to compatibility testing.
Bisphenol A-Bis(diphenyl phosphate) (BDP)
A halogen-free phosphorus flame retardant with relatively low volatility for engineering resin systems.
Typical usesPC/ABS and related engineering-plastic blends used in electrical, electronic and molded applications.
TCEP
A chlorinated phosphate ester historically used as an additive flame retardant and plasticizer.
Typical usesPolyurethane, PVC, resins, textiles and coatings where permitted; current regulatory and customer requirements must be checked.
Confirm chemical identity, grade and suitability before ordering.
ATH
Aluminium trihydrate is a mineral flame-retardant and smoke-suppressant filler that releases water when heated.
Typical usesWire and cable compounds, plastics, rubber, coatings, carpet backing and construction materials.
Optical Brighteners
View category guide →AOBO-OB1
A diphenylethylene bisbenzoxazole optical brightener used to offset yellow tone and increase perceived brightness in polyester and plastics.
Typical usesPolyester, ABS, PS, HIPS, PA, PC, PP, EVA and rigid PVC, subject to formulation and processing tests.
AOBO-OB
A fluorescent brightener with broad resin compatibility for blue-white optical enhancement.
Typical usesPolyolefins, PVC, PS, ABS, polyester, coatings, printing inks and masterbatch formulations.
AOBO-FP127
A fluorescent whitening grade commonly selected for plastics requiring good dispersion and brightening.
Typical usesPVC, polystyrene, polyurethane, PMMA and related plastic or coating systems.
AOBO-CBS-X
A water-soluble distyrylbiphenyl-type fluorescent whitening agent for laundry and cleaning formulations.
Typical usesPowder and liquid detergents, laundry products, soap and compatible textile-brightening systems.
AOBO-ER199 / ER199:1
A fluorescent brightener grade family associated with polyester and synthetic-fiber whitening.
Typical usesPolyester staple fiber, acetate, nylon and compatible blended textiles; the exact grade identity should be confirmed.
Confirm chemical identity, grade and suitability before ordering.
AOBO-KCB
A fluorescent whitening grade used to improve brightness and mask yellow tone in polymers and elastomers.
Typical usesEVA, PE, PP, PVC, PS, ABS, PMMA, TPE/TPU, polyurethane and foamed footwear compounds.
Water Treatment Additives
6 productsSodium Dichloroisocyanurate 56% / 60% (SDIC)
A stable solid chlorine donor that releases available chlorine in water.
Typical usesSwimming pools, industrial and commercial water treatment, sanitation and selected emergency or point-of-use disinfection applications.
Trichloroisocyanuric Acid 90% (TCCA)
A concentrated, slow-dissolving chlorinated isocyanurate used as a stabilized source of available chlorine.
Typical usesPool and spa treatment, industrial water systems and sanitation formulations following product-label requirements.
Sodium Hypochlorite 99%
A chlorine-releasing oxidizing disinfectant listed by AOBO at 99% specification.
Typical usesDrinking-water and wastewater treatment, surface sanitation, bleaching and general industrial disinfection.
Calcium Hypochlorite 65% / 70%
A solid chlorinating compound that provides available chlorine for oxidation and disinfection.
Typical usesSwimming pools, drinking-water and wastewater treatment, sanitation and bleaching applications.
Disinfectant
A general product category covering formulations intended to control microorganisms; chemistry and concentration vary by product.
Typical usesWater systems, industrial sanitation and hard-surface disinfection according to the confirmed active ingredient and label.
Confirm chemical identity, grade and suitability before ordering.
Cyanuric Acid 98.5%
A triazine compound used as a stabilizer and as a raw material for chlorinated isocyanurates and other derivatives.
Typical usesOutdoor pool chlorine stabilization and manufacture of water-treatment, resin and specialty chemical products.
PVC Additives
4 productsPowder NBR (PVC Modification & Friction Material)
Powdered nitrile rubber is an elastomeric modifier that disperses into PVC and other compound systems.
Typical usesPVC modification, thermoplastic elastomers, brake linings and other friction materials, adhesives, footwear and molded rubber goods.
HNBR (Hydrogenated Nitrile)
A hydrogenated nitrile elastomer selected for oil resistance together with improved heat, ozone and aging performance versus conventional NBR.
Typical usesAutomotive seals and hoses, industrial sealing, oilfield components, belts and other demanding rubber applications.
CPE
Chlorinated polyethylene is used as an impact modifier, flexible polymer component or elastomer depending on chlorine level and grade.
Typical usesRigid PVC profiles, pipe, fittings, sheets and siding, plus cable compounds, hoses, rubber blends and molded products.
ACR
An acrylic processing-aid or impact-modifier grade used to improve PVC melt behavior and finished-product performance.
Typical usesPVC foam board, profiles, pipe, fittings and sheet where fusion, melt strength, surface quality or impact performance is required.
Other Chemicals
13 productsp-Toluene Sulfonyl Chloride (PTSC)
A reactive sulfonyl chloride intermediate used to introduce p-toluenesulfonyl groups in organic synthesis.
Typical usesManufacture of sulfonamides, dyes, pharmaceuticals, agrochemical intermediates and specialty-resin or plasticizer ingredients.
p-Toluene Sulfonamide (PTSA)
A solid sulfonamide used as a chemical intermediate and functional ingredient in selected resin systems.
Typical usesPlasticizers and resins, paints and coatings, organic synthesis and specialty formulation applications.
Acetone
A volatile, water-miscible ketone widely used as an industrial solvent and chemical intermediate.
Typical usesCoatings, adhesives, resins, cleaning and degreasing, plastics and synthesis of other industrial chemicals.
Trimethylolpropane Trimethacrylate (TMPTMA)
A multifunctional methacrylate monomer used as a crosslinker, coagent and reactive diluent.
Typical usesRubber and plastics crosslinking, UV-curable inks and coatings, adhesives, composites and polymer modification.
Hydrazine Hydrate
An aqueous form of hydrazine used as a strong reducing agent and reactive chemical intermediate.
Typical usesWater-treatment oxygen scavenging, polymer and blowing-agent manufacture, metal treatment, pharmaceuticals, agrochemicals and other synthesis.
Nitrocellulose
A film-forming cellulose nitrate resin supplied in grades selected for viscosity, nitrogen content and wetting medium.
Typical usesPrinting inks, wood and metal coatings, lacquers, nail coatings, leather finishes and adhesives.
Water Soluble Polyester Resin
A water-compatible polyester binder or surface-treatment resin whose properties depend on molecular design and grade.
Typical usesWater-based inks and coatings, PET film treatment, fiber and paper processing, metal treatment and adhesive formulations.
Dicumyl Peroxide (DCP)
An organic peroxide used as a free-radical initiator and high-temperature crosslinking or vulcanizing agent.
Typical usesCrosslinking of PE, EVA and elastomers, rubber curing, wire and cable compounds and polymerization processes.
2,4-Dichlorotoluene
A chlorinated aromatic liquid used mainly as a high-boiling intermediate for further chemical synthesis.
Typical usesManufacture of agrochemical, dye, pharmaceutical, preservative and peroxide intermediates.
Hexamine (Hexamethylenetetramine)
A crystalline aminal also known as methenamine, used as a hardener and chemical intermediate.
Typical usesPhenolic-resin curing, rubber chemicals, foundry and friction-material binders and manufacture of specialty intermediates.
Paraformaldehyde
A solid polymeric form of formaldehyde used as a concentrated formaldehyde source in industrial reactions.
Typical usesResins and adhesives, agrochemical and pharmaceutical intermediates, hardeners, coatings and controlled disinfection applications.
Sodium Nitrite
An inorganic nitrite used as a reactive intermediate, corrosion inhibitor and process chemical.
Typical usesDiazotization for dyes, pharmaceutical and agrochemical synthesis, metal-treatment fluids, textiles, photography and rubber chemicals.
OBSC
4,4′-Oxybis(benzenesulfonyl chloride), a reactive intermediate in the OBSH production chain.
Typical usesManufacture of OBSH blowing agent and selected sulfonamide, pharmaceutical, dye, coating and high-polymer intermediates.